The Online Home Business Report

«     »

How To Lay Bathroom Floor Tiles ?

Replacing the tiles of bathroom floor is not a cumbersome job. If you have basic knowledge of using different tools used in this process then you can easily do it. One thing that is important is what kind of tile you are selecting for your floor- glass tile or ceramic tile. In case of glass tiles you need to confirm whether the tiles can be used for installing a floor or not.

Tools used in this process are- cutters, tile nippers, grout, a large sponge, grout spacers, and a notched trowel. However, for sheet tiles grout spacers are not required and they can be easily installed because they have ready to install mosaics.

Before putting new tiles on floor you need to carefully remove old tiles from your bathroom. However, this is little difficult to do. After removing old tiles from bathroom floor, make sure the surface is smooth and clean. You can use grease cleaners to ensure there is no grease on the floor.

For having the estimate of number of tiles required for the job, you can measure the size of space. While purchasing tiles, always take some extra pieces as tiles with same color is little difficult to be available in future.

Remove all the molding and fixtures like the toilet or sinks from the bathroom. You also need to purchase subfloor, either green board or cement board and screw it to the floor. It should be cleaned and leveled.

You can now start placing the tiles along the longest wall. Mix tile adhesive and work in small areas at a time. After laying a tile, tap firmly with a rubber mallet to set. Use grout spacers between each tile to keep the spaces even and uniform. You can use the tile cutters and nippers to cut tiles and fit them around your cabinets, tubs, and other fixtures.

Leave tiles to set for 24 hours. After that you need to spread grout into the spaces between tiles with help of trowel. Wipe off excess grout with a wet sponge. Next day, run a damp mop over the tiles to clean off any additional grout. Let the grout cure for few days before stepping on the flooring.

Tiles are now fixed properly and you can set all the fixtures in the bathroom again. Put the extra tiles aside for future use. Your work is over now and you can enjoy new look of your bathroom.

Scott Rodgers is a noted author who has been providing ample guidance on plumbing works all across the nation. His expensive knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Blountstown Plumbers (Need one?click here!) to Mc David Plumbers (Need one?click here!).


Post a Comment